U0200 – BMW DTC

BMW DTC U0200 – Lost Communication With ‘Door Control Module B’

DTC U0200 meaning on BMW

The DTC U0200 code on a BMW indicates a communication error with the ‘Door Control Module B’. This means that the vehicle’s main computer, known as the Engine Control Module (ECM), is unable to establish communication with the specific door control module responsible for managing functions related to door operation and control.

BMW DTC U0200 symptoms

Symptoms of the DTC U0200 code on a BMW may include:

• Malfunctioning power windows
• Non-responsive door locks
• Interior lights not working properly
• Problems with the central locking system

BMW DTC U0200 causes

The DTC U0200 code on a BMW can be caused by various factors, including:

• Faulty wiring or connectors between the ECM and the door control module
• A malfunctioning door control module
• Interference from other electronic components

BMW DTC U0200 seriousness

While the DTC U0200 code may not directly affect the drivability of the vehicle, it can lead to inconvenience and potential safety issues if critical door functions are compromised. It is recommended to address this issue promptly to ensure proper operation of the affected systems.

How to diagnose DTC U0200 on BMW

To diagnose the DTC U0200 code on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
2. Inspect the wiring and connectors between the ECM and the door control module for any damage or loose connections.
3. Check the door control module for proper functionality and communication.
4. Perform a reset of the ECM and re-scan for any remaining fault codes.

How to fix DTC U0200 on BMW

To fix the DTC U0200 code on a BMW, consider the following steps:

1. Repair or replace any damaged wiring or connectors between the ECM and the door control module.
2. If the door control module is faulty, replace it with a new or refurbished unit.
3. Ensure proper communication between the ECM and the door control module.
4. Clear the fault codes from the ECM memory after completing the repairs.

How to erase DTC U0200 on BMW

To erase the DTC U0200 code on a BMW, follow these steps:

1. Use a diagnostic scanner to access the ECM and locate the stored fault codes.
2. Select the option to clear the fault codes from the ECM memory.
3. Confirm the deletion of the DTC U0200 code and perform a final scan to ensure it has been successfully erased.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.