U0226 – BMW DTC

BMW DTC U0226 – Lost Communication With ‘Door Window Motor E’

DTC U0226 meaning on BMW

The DTC U0226 code on a BMW indicates a communication error between the vehicle’s control module and the ‘Door Window Motor E’. This error suggests that the control module is unable to establish proper communication with the specific door window motor, leading to potential issues with the operation of that particular window.

BMW DTC U0226 symptoms

Symptoms associated with the DTC U0226 code on a BMW may include:

• Failure of the affected window to operate
• Intermittent or erratic window operation
• Loss of control over the window from the driver’s side

BMW DTC U0226 causes

The potential causes of the DTC U0226 code on a BMW include:

• Faulty ‘Door Window Motor E’
• Wiring or connection issues between the control module and the window motor
• Defective control module

BMW DTC U0226 seriousness

While the DTC U0226 code may not directly affect the drivability of the vehicle, it can lead to inconvenience and potential safety concerns if a window becomes inoperable. It is advisable to address this issue promptly to ensure proper functionality of the affected window.

How to diagnose DTC U0226 on BMW

To diagnose the DTC U0226 code on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s control module.
2. Inspect the wiring and connections between the control module and the ‘Door Window Motor E’ for any visible damage or loose connections.
3. Test the window motor for proper functionality by applying direct power to it.
4. If necessary, perform a communication test between the control module and the window motor to identify any communication issues.

How to fix DTC U0226 on BMW

To fix the DTC U0226 code on a BMW, consider the following steps:

1. Replace the faulty ‘Door Window Motor E’ if it is determined to be the root cause of the communication error.
2. Repair or replace any damaged wiring or connections between the control module and the window motor.
3. If the control module is found to be defective, it may need to be reprogrammed or replaced.

How to erase DTC U0226 on BMW

To erase the DTC U0226 code on a BMW, follow these steps:

1. Use a diagnostic scanner to clear the fault codes stored in the vehicle’s control module.
2. After addressing the root cause of the communication error and ensuring proper repairs have been made, clear the code to reset the system.
3. Perform a test drive to confirm that the issue has been resolved and the code does not reappear.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.