U0250 – BMW DTC

BMW DTC U0250 – Lost Communication With Impact Classification System Module

DTC U0250 meaning on BMW

The DTC U0250 code on a BMW indicates a communication problem with the Impact Classification System (ICS) module. This module is responsible for detecting impacts and deploying safety features such as airbags in the event of a collision. The U0250 code specifically points to a lost communication issue between the vehicle’s control modules and the ICS module.

BMW DTC U0250 symptoms

Symptoms of the DTC U0250 code on a BMW may include:

• Malfunction indicator lamp (MIL) or airbag warning light illuminated on the dashboard
• Airbag system may be disabled or not deploy in the event of a collision
• Loss of communication with the ICS module

BMW DTC U0250 causes

Common causes of the DTC U0250 code on a BMW include:

• Faulty wiring or connections between the control modules and the ICS module
• Defective ICS module
• Software issues within the vehicle’s control modules

BMW DTC U0250 seriousness

The DTC U0250 code should be taken seriously as it indicates a potential safety issue with the vehicle’s airbag system. If the airbags are not functioning properly due to a communication error with the ICS module, it can compromise the safety of the vehicle occupants in the event of a collision.

How to diagnose DTC U0250 on BMW

To diagnose the DTC U0250 code on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the specific fault codes stored in the vehicle’s control modules
2. Inspect the wiring and connections between the control modules and the ICS module for any damage or corrosion
3. Test the ICS module for proper functionality
4. Check for any software updates or reprogramming needed for the control modules

How to fix DTC U0250 on BMW

To fix the DTC U0250 code on a BMW, the following steps may be taken:

1. Repair or replace any damaged wiring or connections between the control modules and the ICS module
2. Replace the faulty ICS module if necessary
3. Perform any software updates or reprogramming required for the control modules

How to erase DTC U0250 on BMW

To erase the DTC U0250 code on a BMW, a mechanic can use a diagnostic scanner to clear the fault codes stored in the vehicle’s control modules. Once the underlying issue has been addressed and fixed, the code can be cleared to reset the system and turn off the malfunction indicator lamp or airbag warning light.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.