U042C – BMW DTC

BMW DTC U042C – Invalid Data Received from Chassis Control Module ‘B’

DTC U042C meaning on BMW

The DTC U042C on a BMW indicates that the Engine Control Module (ECM) has detected invalid data received from the Chassis Control Module ‘B’. This means that there is a communication error between the ECM and the Chassis Control Module ‘B’, which could potentially affect the vehicle’s performance and safety systems.

BMW DTC U042C symptoms

Symptoms of the DTC U042C on a BMW may include:

• Check Engine Light illuminated
• ABS or traction control warning lights on
• Stability control system malfunction
• Reduced vehicle stability

BMW DTC U042C causes

Possible causes of the DTC U042C on a BMW include:

• Faulty wiring or connectors between the ECM and Chassis Control Module ‘B’
• Defective Chassis Control Module ‘B’
• Software issues in the ECM or Chassis Control Module ‘B’
• Interference from other electronic components

BMW DTC U042C seriousness

The DTC U042C should be addressed promptly as it can affect the proper functioning of the vehicle’s chassis control systems. Ignoring this issue may lead to compromised safety and stability while driving.

How to diagnose DTC U042C on BMW

To diagnose the DTC U042C on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM
2. Inspect the wiring and connectors between the ECM and Chassis Control Module ‘B’ for any damage or corrosion
3. Check for any software updates available for the ECM and Chassis Control Module ‘B’
4. Perform a communication test between the ECM and Chassis Control Module ‘B’ to verify data exchange

How to fix DTC U042C on BMW

To fix the DTC U042C on a BMW, the following steps may be taken:

1. Repair or replace any damaged wiring or connectors between the ECM and Chassis Control Module ‘B’
2. Update the software in the ECM and Chassis Control Module ‘B’ to the latest version
3. If the Chassis Control Module ‘B’ is faulty, it may need to be replaced
4. Clear the fault codes using a diagnostic scanner after the repairs have been completed

How to erase DTC U042C on BMW

To erase the DTC U042C on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port
2. Select the option to erase fault codes from the ECM
3. Follow the on-screen prompts to clear the DTC U042C code
4. Verify that the code has been successfully erased by rescanning the vehicle

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.