U04A3 – BMW DTC

BMW DTC U04A3 – Invalid Data Received From Hybrid/EV Battery Interface Control Module ‘C’

DTC U04A3 meaning on BMW

The Diagnostic Trouble Code (DTC) U04A3 on a BMW indicates that the vehicle’s onboard diagnostic system has detected invalid data being received from the Hybrid/EV Battery Interface Control Module ‘C’. This module is responsible for managing communication between the vehicle’s hybrid or electric powertrain system and the main vehicle control unit.

BMW DTC U04A3 symptoms

Symptoms of the DTC U04A3 on a BMW may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Reduced hybrid or electric powertrain performance
• In some cases, the vehicle may go into a reduced power or limp mode

BMW DTC U04A3 causes

The DTC U04A3 on a BMW can be caused by various factors, including:

• Faulty Hybrid/EV Battery Interface Control Module ‘C’
• Intermittent electrical connection issues
• Software glitches or communication errors

BMW DTC U04A3 seriousness

The seriousness of the DTC U04A3 on a BMW depends on the underlying cause. While the vehicle may still be operable with this fault, it is important to address it promptly to prevent potential performance issues or further damage to the hybrid or electric powertrain system.

How to diagnose DTC U04A3 on BMW

To diagnose the DTC U04A3 on a BMW, a comprehensive diagnostic scan tool capable of reading manufacturer-specific codes is required. The following steps can be taken:

1. Retrieve the DTC U04A3 code from the vehicle’s onboard computer
2. Check for any related codes or freeze frame data
3. Inspect the Hybrid/EV Battery Interface Control Module ‘C’ for any visible damage or loose connections
4. Perform a communication test to ensure proper data exchange between modules

How to fix DTC U04A3 on BMW

Fixing the DTC U04A3 on a BMW may involve the following steps:

1. Inspect and repair any damaged wiring or connectors related to the Hybrid/EV Battery Interface Control Module ‘C’
2. If the module is faulty, it may need to be replaced with a new or refurbished unit
3. Clear the DTC U04A3 code from the vehicle’s memory after the repair is completed

How to erase DTC U04A3 on BMW

To erase the DTC U04A3 code on a BMW, follow these steps:

1. Use a diagnostic scan tool to access the vehicle’s onboard computer system
2. Select the option to clear or erase fault codes
3. Confirm the action and wait for the scan tool to complete the process
4. Verify that the DTC U04A3 code has been successfully cleared by checking for any remaining fault codes

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.