U04AF – BMW DTC

BMW DTC U04AF – Invalid Data Received From Hybrid/EV Battery Interface Control Module ‘O’

DTC U04AF meaning on BMW

DTC U04AF on a BMW indicates that the vehicle’s onboard diagnostic system has detected invalid data received from the Hybrid/EV Battery Interface Control Module ‘O’. This module is responsible for managing communication between the vehicle’s hybrid or electric powertrain components and the main vehicle control systems.

BMW DTC U04AF symptoms

Symptoms of DTC U04AF on a BMW may include:

• Check Engine Light illuminated
• Hybrid or electric drive system may not operate correctly
• Reduced power or performance
• Issues with battery charging or energy management

BMW DTC U04AF causes

Possible causes of DTC U04AF on a BMW include:

• Faulty Hybrid/EV Battery Interface Control Module ‘O’
• Communication network issues
• Wiring or connection problems
• Software glitches or malfunctions

BMW DTC U04AF seriousness

The seriousness of DTC U04AF on a BMW depends on the underlying cause. Ignoring this fault code can lead to potential drivability issues and may affect the overall performance of the hybrid or electric powertrain system. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC U04AF on BMW

To diagnose DTC U04AF on a BMW, a comprehensive diagnostic scan tool capable of reading manufacturer-specific codes is required. The following steps can help in diagnosing the issue:

1. Perform a full system scan to retrieve all stored fault codes
2. Check the communication network for any faults or interruptions
3. Inspect the Hybrid/EV Battery Interface Control Module ‘O’ for any visible damage or loose connections
4. Verify the software version of the control module and update if necessary

How to fix DTC U04AF on BMW

To fix DTC U04AF on a BMW, follow these steps:

1. Inspect and repair any damaged wiring or connections related to the Hybrid/EV Battery Interface Control Module ‘O’
2. Update the software of the control module to the latest version
3. Replace the faulty Hybrid/EV Battery Interface Control Module ‘O’ if necessary
4. Clear the fault codes and perform a test drive to ensure the issue is resolved

How to erase DTC U04AF on BMW

To erase DTC U04AF on a BMW, use a diagnostic scan tool to clear the fault codes stored in the vehicle’s system. Follow these steps:

1. Connect the diagnostic scan tool to the vehicle’s OBD-II port
2. Select the option to erase fault codes or clear DTCs
3. Confirm the action and wait for the scan tool to complete the process
4. Disconnect the scan tool and start the vehicle to ensure the fault code has been successfully erased

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.