U0513 – BMW DTC

BMW DTC U0513 – Invalid Data Received From Yaw Rate Sensor Module

DTC U0513 meaning on BMW

DTC U0513 on a BMW indicates that the Engine Control Module (ECM) has detected invalid data from the Yaw Rate Sensor Module. The Yaw Rate Sensor is responsible for measuring the vehicle’s rotational movement around its vertical axis, providing crucial data for stability control systems.

BMW DTC U0513 symptoms

Symptoms of DTC U0513 on a BMW may include:

• ABS or stability control warning lights illuminated on the dashboard
• Loss of stability control functionality
• Unexpected braking or steering behavior

BMW DTC U0513 causes

The common causes of DTC U0513 on a BMW are:

• Faulty Yaw Rate Sensor Module
• Wiring or connection issues between the Yaw Rate Sensor Module and the ECM
• Interference from other electronic components

BMW DTC U0513 seriousness

DTC U0513 should be taken seriously as it can affect the vehicle’s stability control system, potentially compromising safety during driving maneuvers. It is recommended to address this issue promptly to ensure proper functionality of the vehicle’s safety systems.

How to diagnose DTC U0513 on BMW

To diagnose DTC U0513 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes from the ECM.
2. Inspect the wiring and connections to the Yaw Rate Sensor Module for any visible damage or corrosion.
3. Perform a sensor test to check the functionality of the Yaw Rate Sensor.
4. Check for any other related fault codes that may provide additional information.

How to fix DTC U0513 on BMW

To fix DTC U0513 on a BMW, consider the following steps:

1. Replace the Yaw Rate Sensor Module if it is found to be faulty.
2. Repair any damaged wiring or connections leading to the Yaw Rate Sensor Module.
3. Clear the fault codes from the ECM after completing the repairs.
4. Perform a test drive to ensure the issue has been resolved.

How to erase DTC U0513 on BMW

To erase DTC U0513 on a BMW, use a diagnostic scanner to clear the fault codes stored in the ECM. Follow these steps:

1. Connect the diagnostic scanner to the vehicle’s OBD-II port.
2. Select the option to erase fault codes from the ECM.
3. Confirm the action and wait for the scanner to complete the process.
4. Verify that the DTC U0513 code has been successfully cleared.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.