DTClookup.com

Search DTC

U059C – BMW DTC

BMW DTC U059C – Invalid Data Received From Drive Motor Control Module ‘C’

DTC U059C meaning on BMW

The DTC U059C on a BMW indicates that the Engine Control Module (ECM) has detected invalid data being received from the Drive Motor Control Module ‘C’. This typically points to a communication error between the ECM and the Drive Motor Control Module ‘C’, which can affect the performance and operation of the vehicle.

BMW DTC U059C symptoms

Symptoms associated with the BMW DTC U059C may include:

  • Check Engine Light (MIL) illuminated
  • Reduced engine power
  • Transmission shifting issues
  • Loss of acceleration
  • Vehicle going into limp mode

BMW DTC U059C causes

The common causes of the BMW DTC U059C may include:

  • Faulty Drive Motor Control Module ‘C’
  • Wiring or connection issues between the ECM and Drive Motor Control Module ‘C’
  • Software glitches or programming errors
  • Interference from other electronic components

BMW DTC U059C seriousness

The DTC U059C on a BMW should not be ignored as it can lead to performance issues and potential safety concerns. Driving with this fault present may result in reduced engine power, transmission problems, and other drivability issues. It is recommended to address this issue promptly to prevent further damage to the vehicle.

How to diagnose DTC U059C on BMW

To diagnose the DTC U059C on a BMW, a mechanic would typically perform the following steps:

  1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM
  2. Inspect the wiring and connections between the ECM and Drive Motor Control Module ‘C’ for any damage or corrosion
  3. Check the functionality of the Drive Motor Control Module ‘C’ using specialized diagnostic tools
  4. Perform a software update or reprogramming if necessary

How to fix DTC U059C on BMW

To fix the DTC U059C on a BMW, the following steps may be taken:

  1. Repair or replace any damaged wiring or connections between the ECM and Drive Motor Control Module ‘C’
  2. Replace the faulty Drive Motor Control Module ‘C’ if necessary
  3. Perform a software update or reprogramming to ensure proper communication between the modules
  4. Clear the fault codes using a diagnostic scanner after the repairs have been completed

How to erase DTC U059C on BMW

To erase the DTC U059C on a BMW, follow these steps:

  1. Connect a diagnostic scanner to the vehicle’s OBD-II port
  2. Access the ECM module and navigate to the fault code section
  3. Select the option to clear the fault codes stored in the ECM
  4. Confirm the action and wait for the scanner to erase the DTC U059C code

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

← All BMW Diagnostic Trouble Codes

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.