U05A2 – BMW DTC

BMW DTC U05A2 – NOx Sensor ‘B’ Received Invalid Data From ECM/PCM

DTC U05A2 meaning on BMW

DTC U05A2 on a BMW indicates that the NOx Sensor ‘B’ has received invalid data from the Engine Control Module/Powertrain Control Module (ECM/PCM). This fault code is specific to the NOx sensor ‘B’, which is responsible for monitoring the levels of nitrogen oxides in the exhaust gases.

BMW DTC U05A2 symptoms

Symptoms of DTC U05A2 on a BMW may include:

• Check Engine Light (MIL) illuminated
• Reduced engine performance
• Increased fuel consumption
• Failed emissions test

BMW DTC U05A2 causes

The common causes of DTC U05A2 on a BMW include:

• Faulty NOx Sensor ‘B’
• Wiring or connector issues in the NOx sensor circuit
• ECM/PCM communication errors
• Exhaust system leaks

BMW DTC U05A2 seriousness

DTC U05A2 should not be ignored as it can lead to increased emissions, reduced fuel efficiency, and potential engine performance issues. It is important to address this fault code promptly to ensure proper vehicle operation and compliance with emissions regulations.

How to diagnose DTC U05A2 on BMW

To diagnose DTC U05A2 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM/PCM.
2. Inspect the wiring and connectors in the NOx sensor ‘B’ circuit for any damage or corrosion.
3. Check the NOx sensor ‘B’ for proper operation and signal output.
4. Perform a thorough inspection of the exhaust system for leaks or damage.

How to fix DTC U05A2 on BMW

To fix DTC U05A2 on a BMW, consider the following:

1. Replace the faulty NOx Sensor ‘B’ if necessary.
2. Repair any wiring or connector issues in the NOx sensor circuit.
3. Clear the fault codes using a diagnostic scanner after completing the repairs.
4. Perform a test drive to ensure the issue has been resolved.

How to erase DTC U05A2 on BMW

To erase DTC U05A2 on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port.
2. Select the option to erase fault codes from the ECM/PCM.
3. Follow the on-screen prompts to clear the DTC U05A2 code.
4. Verify that the fault code has been successfully erased by rescanning the system.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.