U0601 – BMW DTC

BMW DTC U0601 – Lost Communication With Particulate Filter Pressure Sensor ‘A’

DTC U0601 meaning on BMW

DTC U0601 on a BMW indicates a communication error with the Particulate Filter Pressure Sensor ‘A’. This error code is triggered when the Engine Control Module (ECM) is unable to receive data from the sensor, leading to a loss of communication between the sensor and the ECM.

BMW DTC U0601 symptoms

Symptoms of DTC U0601 on a BMW may include:

• Check Engine Light (CEL) illuminated
• Reduced engine performance
• Increased fuel consumption
• Possible regeneration issues with the particulate filter

BMW DTC U0601 causes

Common causes of DTC U0601 on a BMW include:

• Faulty Particulate Filter Pressure Sensor ‘A’
• Wiring or connection issues between the sensor and ECM
• ECM software or hardware problems

BMW DTC U0601 seriousness

DTC U0601 should not be ignored as it can lead to potential issues with the particulate filter system and affect the overall performance of the vehicle. It is recommended to address this error code promptly to prevent further complications.

How to diagnose DTC U0601 on BMW

To diagnose DTC U0601 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes
2. Inspect the wiring and connections to the Particulate Filter Pressure Sensor ‘A’
3. Check the sensor for any signs of damage or malfunction
4. Perform a communication test between the sensor and ECM

How to fix DTC U0601 on BMW

To fix DTC U0601 on a BMW, consider the following:

1. Replace the faulty Particulate Filter Pressure Sensor ‘A’
2. Repair any damaged wiring or connections
3. Update the ECM software if necessary
4. Clear the fault codes and perform a test drive to ensure the issue is resolved

How to erase DTC U0601 on BMW

To erase DTC U0601 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes
2. Disconnect the battery for a few minutes to reset the ECM
3. After clearing the codes, perform a test drive to confirm the error code is no longer present

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.