U0603 – BMW DTC

BMW DTC U0603 – Lost Communication With Fuel Pressure Sensor ‘A’

DTC U0603 meaning on BMW

DTC U0603 on a BMW indicates a communication error with the fuel pressure sensor ‘A’. This Diagnostic Trouble Code (DTC) is triggered when the Engine Control Module (ECM) or Powertrain Control Module (PCM) is unable to receive data from the fuel pressure sensor, leading to a loss of communication.

BMW DTC U0603 symptoms

Symptoms of DTC U0603 on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance
• Potential stalling or rough idling
• Difficulty starting the vehicle

BMW DTC U0603 causes

The common causes of DTC U0603 on a BMW include:

• Defective fuel pressure sensor ‘A’
• Wiring or connection issues between the sensor and ECM/PCM
• ECM/PCM software or hardware malfunction

BMW DTC U0603 seriousness

DTC U0603 should not be ignored as it can lead to potential drivability issues and affect the overall performance of the vehicle. It is important to address this communication error promptly to prevent further damage to the engine or fuel system.

How to diagnose DTC U0603 on BMW

To diagnose DTC U0603 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM/PCM
2. Inspect the wiring and connections to the fuel pressure sensor ‘A’ for any damage or corrosion
3. Test the fuel pressure sensor for proper functionality using a multimeter
4. Check for any software updates for the ECM/PCM that may address communication issues

How to fix DTC U0603 on BMW

To fix DTC U0603 on a BMW, consider the following steps:

1. Replace the faulty fuel pressure sensor ‘A’ if it is found to be defective
2. Repair or replace any damaged wiring or connectors leading to the sensor
3. If the issue persists, consult a professional mechanic to diagnose potential ECM/PCM problems

How to erase DTC U0603 on BMW

To erase DTC U0603 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes stored in the ECM/PCM
2. After fixing the underlying issue, drive the vehicle to allow the ECM/PCM to relearn and verify the repair
3. If the repair was successful, the Check Engine Light should turn off automatically

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.