U110E – BMW DTC

BMW DTC U110E – Message Monitoring Torque Request ETC Alive Check

DTC U110E meaning on BMW

The DTC U110E code on a BMW refers to ¨Message Monitoring Torque Request ETC Alive Check.¨ This diagnostic trouble code indicates an issue with the monitoring of the torque request signal from the Electronic Throttle Control (ETC) system.

BMW DTC U110E symptoms

Symptoms of the BMW DTC U110E code may include:

• Check Engine Light illuminated
• Reduced engine power
• Throttle response issues

BMW DTC U110E causes

Common causes of the BMW DTC U110E code include:

• Faulty Electronic Throttle Control (ETC) module
• Wiring or connection issues in the ETC system
• Software glitches or communication errors

BMW DTC U110E seriousness

The DTC U110E code should be addressed promptly as it can lead to drivability issues and potential safety concerns. Ignoring this code may result in reduced engine performance and could potentially leave the vehicle stranded.

How to diagnose DTC U110E on BMW

To diagnose the DTC U110E on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer.
2. Inspect the wiring and connections related to the Electronic Throttle Control system for any visible damage or corrosion.
3. Perform a thorough inspection of the ETC module and its components for any signs of wear or malfunction.
4. Check for any software updates or reprogramming that may be required to address communication errors.

How to fix DTC U110E on BMW

To fix the DTC U110E on a BMW, consider the following steps:

1. Replace the Electronic Throttle Control (ETC) module if it is found to be faulty.
2. Repair or replace any damaged wiring or connections in the ETC system.
3. Clear the fault codes using a diagnostic scanner after completing the repairs.
4. Perform a test drive to ensure the issue has been resolved and the symptoms have disappeared.

How to erase DTC U110E on BMW

To erase the DTC U110E code on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port.
2. Select the option to clear fault codes from the scanner menu.
3. Confirm the action and wait for the scanner to erase the DTC U110E code.
4. Disconnect the scanner and start the vehicle to ensure the code has been successfully cleared.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.