U11A5 – BMW DTC

BMW DTC U11A5 – Lost Communication With Status TCM via FA-CAN

DTC U11A5 meaning on BMW

The Diagnostic Trouble Code (DTC) U11A5 for BMW indicates a communication error between the Transmission Control Module (TCM) and the Status Transmission Control Module (TCM) over the FA-CAN (FlexRay-CAN) network. This error typically means that the TCM is unable to receive or send data to the Status TCM, leading to potential issues with transmission control and monitoring.

BMW DTC U11A5 symptoms

Symptoms of the DTC U11A5 on a BMW may include:

• Transmission shifting issues
• Loss of transmission control features
• Warning lights on the dashboard related to the transmission system
• Reduced vehicle performance

BMW DTC U11A5 causes

Common causes of the DTC U11A5 on a BMW include:

• Faulty wiring or connectors in the FA-CAN network
• Issues with the TCM or Status TCM
• Interference from other electronic components
• Software glitches or communication errors

BMW DTC U11A5 seriousness

The DTC U11A5 should be addressed promptly as it can lead to potential transmission malfunctions and affect the overall drivability of the vehicle. Ignoring this code may result in further damage to the transmission system and compromise vehicle safety.

How to diagnose DTC U11A5 on BMW

To diagnose the DTC U11A5 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes and identify the specific error.
2. Inspect the FA-CAN network wiring and connectors for any visible damage or loose connections.
3. Check the TCM and Status TCM for any signs of malfunction or communication issues.
4. Perform a communication test to verify the data exchange between the TCM and Status TCM.

How to fix DTC U11A5 on BMW

To fix the DTC U11A5 on a BMW, you can try the following solutions:

1. Repair or replace any damaged wiring or connectors in the FA-CAN network.
2. If the TCM or Status TCM is faulty, consider replacing the affected module.
3. Update the software of the TCM and Status TCM to address any communication errors.
4. Clear the fault codes using a diagnostic scanner after performing the necessary repairs.

How to erase DTC U11A5 on BMW

To erase the DTC U11A5 on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port.
2. Select the ¨Clear DTCs¨ or ¨Erase Codes¨ option on the scanner menu.
3. Follow the on-screen instructions to clear the fault codes stored in the system.
4. Verify that the DTC U11A5 has been successfully erased by rescanning the vehicle.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.