U11AD – BMW DTC

BMW DTC U11AD – Message Monitoring Torque Request Crankshaft Transmission Data via A-CAN Alive Check

DTC U11AD meaning on BMW

The DTC U11AD code on a BMW refers to ¨Message Monitoring Torque Request Crankshaft Transmission Data via A-CAN Alive Check.¨ This diagnostic trouble code indicates an issue with the communication system related to monitoring torque requests between the crankshaft and transmission data via the A-CAN network.

BMW DTC U11AD symptoms

Symptoms of the BMW DTC U11AD code may include:

• Check Engine Light (MIL) illuminated
• Reduced engine performance
• Transmission shifting issues
• Vehicle may go into limp mode

BMW DTC U11AD causes

Common causes of the BMW DTC U11AD code include:

• Faulty torque sensor
• Wiring or connection issues in the A-CAN network
• Defective transmission control module (TCM)
• Software glitches or communication errors

BMW DTC U11AD seriousness

The seriousness of the DTC U11AD code on a BMW depends on the underlying cause. Ignoring this code can lead to further damage to the transmission system and potentially affect the overall drivability of the vehicle. It is recommended to address this issue promptly to prevent any long-term issues.

How to diagnose DTC U11AD on BMW

To diagnose the DTC U11AD code on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes and freeze frame data
2. Inspect the torque sensor and its wiring for any visible damage or loose connections
3. Check the A-CAN network for any communication faults
4. Perform a thorough inspection of the transmission control module (TCM)
5. Test the torque request signals between the crankshaft and transmission

How to fix DTC U11AD on BMW

To fix the DTC U11AD code on a BMW, you can try the following solutions:

1. Repair or replace the faulty torque sensor
2. Address any wiring or connection issues in the A-CAN network
3. Reset the transmission control module (TCM) and perform a software update
4. Clear any stored fault codes and reset the system
5. Test drive the vehicle to ensure the issue has been resolved

How to erase DTC U11AD on BMW

To erase the DTC U11AD code on a BMW, you can use a diagnostic scanner to clear the fault codes. Follow these steps:

1. Connect the diagnostic scanner to the vehicle’s OBD-II port
2. Select the option to erase fault codes or clear DTCs
3. Wait for the scanner to communicate with the vehicle’s system and confirm the deletion of the DTC U11AD code
4. Disconnect the scanner and start the vehicle to ensure the code has been successfully erased

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.