U1212 – BMW DTC

BMW DTC U1212 – Lost Communication With 100ms Task From Master

DTC U1212 meaning on BMW

The DTC U1212 code on a BMW indicates a communication error with the 100ms task from the master control unit. This error typically occurs when the communication between various control modules in the vehicle is disrupted or lost.

BMW DTC U1212 symptoms

Symptoms of the BMW DTC U1212 code may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Loss of communication with certain vehicle systems
• Erratic behavior of electronic components

BMW DTC U1212 causes

Common causes of the BMW DTC U1212 code include:

• Faulty wiring or connectors
• Defective control modules
• Interference from other electronic devices

BMW DTC U1212 seriousness

The DTC U1212 error code is not typically considered a serious issue on its own. However, it can lead to malfunctions in various vehicle systems if left unresolved. It is recommended to diagnose and fix the issue promptly to prevent further complications.

How to diagnose DTC U1212 on BMW

To diagnose the DTC U1212 code on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer.
2. Inspect the wiring and connectors for any visible damage or corrosion.
3. Check for loose connections or poor grounds in the affected circuits.
4. Perform a communication test between control modules to identify the source of the issue.

How to fix DTC U1212 on BMW

To fix the DTC U1212 code on a BMW, consider the following steps:

1. Repair or replace any damaged wiring or connectors in the affected circuits.
2. Ensure all control modules are properly connected and functioning correctly.
3. Clear the fault codes using a diagnostic scanner after making the necessary repairs.
4. Test drive the vehicle to confirm that the issue has been resolved.

How to erase DTC U1212 on BMW

To erase the DTC U1212 code on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port.
2. Select the option to clear fault codes from the scanner menu.
3. Follow the on-screen instructions to erase the DTC U1212 code.
4. Disconnect the scanner and start the vehicle to ensure the code has been successfully cleared.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.