U1241 – BMW DTC

BMW DTC U1241 – Lost Communication With Steering Angle Front Axle

DTC U1241 meaning on BMW

DTC U1241 on a BMW indicates a communication error between the vehicle’s control modules and the steering angle sensor located on the front axle. This error code signifies that the control module is unable to receive data from the steering angle sensor, leading to a loss of communication between the two components.

BMW DTC U1241 symptoms

Symptoms of DTC U1241 on a BMW may include:

• Malfunction indicator light (MIL) or check engine light illuminated on the dashboard
• Loss of power steering assistance
• Inaccurate or erratic steering behavior
• ABS or stability control system warning lights may also be illuminated

BMW DTC U1241 causes

The potential causes of DTC U1241 on a BMW include:

• Faulty steering angle sensor
• Wiring or connection issues between the steering angle sensor and control module
• Defective control module
• Interference from other electronic components

BMW DTC U1241 seriousness

DTC U1241 should be addressed promptly as it can affect the proper functioning of the vehicle’s steering system and safety features. Driving with a malfunctioning steering angle sensor can lead to unpredictable steering behavior and potentially compromise the vehicle’s stability and control.

How to diagnose DTC U1241 on BMW

To diagnose DTC U1241 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s control module
2. Inspect the wiring and connections related to the steering angle sensor for any damage or corrosion
3. Test the steering angle sensor for proper functionality using specialized diagnostic tools
4. Check for any software updates or reprogramming needed for the control module

How to fix DTC U1241 on BMW

To fix DTC U1241 on a BMW, the following steps may be taken:

1. Replace the faulty steering angle sensor if found to be defective
2. Repair or replace any damaged wiring or connectors associated with the steering angle sensor
3. If the control module is faulty, it may need to be replaced or reprogrammed
4. Ensure all connections are secure and free of corrosion

How to erase DTC U1241 on BMW

To erase DTC U1241 on a BMW, the fault codes can be cleared using a diagnostic scanner or by disconnecting the vehicle’s battery for a few minutes. However, it is important to address the underlying issue causing the fault code before clearing it to prevent it from reoccurring.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.