BMW DTC U140A – Invalid Data Received From Throttle Position
DTC U140A meaning on BMW
The DTC U140A code on a BMW indicates that the Engine Control Module (ECM) has detected invalid data being received from the throttle position sensor. This means that the signal being sent by the throttle position sensor does not match the expected values, leading to a potential issue with the sensor or its circuit.
BMW DTC U140A symptoms
Symptoms of the DTC U140A code on a BMW may include:
- Reduced engine power
- Engine stalling or hesitation
- Check Engine Light (CEL) illuminated on the dashboard
- Poor acceleration response
BMW DTC U140A causes
The DTC U140A code on a BMW can be caused by various factors, including:
- Throttle position sensor malfunction
- Wiring or connector issues in the throttle position sensor circuit
- ECM software or hardware problems
BMW DTC U140A seriousness
The DTC U140A code should not be ignored as it can lead to drivability issues and potential safety concerns. It is important to address this code promptly to ensure the proper functioning of the throttle system and overall vehicle performance.
How to diagnose DTC U140A on BMW
To diagnose the DTC U140A code on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
- Inspect the throttle position sensor and its wiring for any visible damage or corrosion.
- Check the throttle position sensor signal using a multimeter to ensure it is within the specified range.
- Perform a thorough inspection of the throttle system components for any other potential issues.
How to fix DTC U140A on BMW
To fix the DTC U140A code on a BMW, you can try the following solutions:
- Replace the throttle position sensor if it is found to be faulty.
- Repair any damaged wiring or connectors in the throttle position sensor circuit.
- Update the ECM software to the latest version to address any software-related issues.
- Clear the fault codes using a diagnostic scanner after completing the repairs.
How to erase DTC U140A on BMW
To erase the DTC U140A code on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. Follow the scanner’s instructions to perform the code clearing process, ensuring that the underlying issue causing the code has been addressed before clearing it.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.