U189F – BMW DTC

BMW DTC U189F – Hybrid Battery Control Module Lost Communication With Hybrid/EV Battery Interface Control Module ‘J’

DTC U189F meaning on BMW

The DTC U189F on a BMW indicates that there is a communication error between the Hybrid Battery Control Module and the Hybrid/EV Battery Interface Control Module ‘J’. This error code signifies a loss of communication between these two critical components in the hybrid system of the vehicle.

BMW DTC U189F symptoms

Symptoms of the DTC U189F on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Hybrid system warning light may be displayed
• Reduced hybrid system performance
• Vehicle may go into a reduced power mode

BMW DTC U189F causes

The DTC U189F on a BMW can be caused by various factors, including:

• Faulty Hybrid Battery Control Module
• Issues with the Hybrid/EV Battery Interface Control Module ‘J’
• Wiring or connection problems between the modules
• Software glitches or communication protocol errors

BMW DTC U189F seriousness

The DTC U189F error code should be addressed promptly as it can affect the performance and efficiency of the hybrid system in the BMW. Ignoring this issue may lead to further complications and potential drivability problems.

How to diagnose DTC U189F on BMW

To diagnose the DTC U189F on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the specific error codes
2. Inspect the wiring and connections between the Hybrid Battery Control Module and the Hybrid/EV Battery Interface Control Module ‘J’
3. Check for any visible signs of damage or corrosion
4. Perform communication tests between the modules to identify the source of the issue

How to fix DTC U189F on BMW

Fixing the DTC U189F on a BMW may involve the following steps:

1. Repair or replace any damaged wiring or connectors
2. Update software or reprogram the modules if necessary
3. Replace the faulty Hybrid Battery Control Module or Hybrid/EV Battery Interface Control Module ‘J’ if needed
4. Clear the error codes and perform a test drive to ensure the issue is resolved

How to erase DTC U189F on BMW

To erase the DTC U189F on a BMW, a mechanic can use a diagnostic scanner to clear the error codes stored in the vehicle’s system. After fixing the underlying issue causing the error code, the mechanic can reset the codes and verify that the problem has been resolved.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.