P1196 – Kia DTC

Kia DTC P1196 – Ignition Switch “Start” Open or Short (1.6L)

DTC P1196 meaning on Kia

DTC P1196 for Kia indicates an issue with the Ignition Switch “Start” circuit. This code is triggered when the Engine Control Module (ECM) detects an open or short circuit in the ignition switch start signal.

Kia DTC P1196 symptoms

Symptoms of DTC P1196 on a Kia may include:

• Engine not starting
• No crank condition
• Check Engine Light illuminated

Kia DTC P1196 causes

Common causes of DTC P1196 on a Kia include:

• Defective ignition switch
• Wiring issues in the ignition switch circuit
• Faulty Engine Control Module (ECM)

Kia DTC P1196 seriousness

DTC P1196 should be addressed promptly as it can prevent the vehicle from starting. Ignoring this issue may result in inconvenience and potential safety concerns if the vehicle fails to start unexpectedly.

How to diagnose DTC P1196 on Kia

To diagnose DTC P1196 on a Kia, a mechanic should:

1. Perform a visual inspection of the ignition switch and related wiring
2. Use a diagnostic scanner to retrieve the fault code and related data
3. Test the ignition switch for proper operation
4. Check for continuity and shorts in the ignition switch circuit

How to fix DTC P1196 on Kia

To fix DTC P1196 on a Kia, the following steps can be taken:

1. Replace the faulty ignition switch if necessary
2. Repair any damaged wiring in the ignition switch circuit
3. If the ECM is determined to be faulty, replace it with a new one

How to erase DTC P1196 on Kia

To erase DTC P1196 on a Kia, the fault code can be cleared using a diagnostic scanner. After the repair has been completed, the code can be erased to reset the ECM and turn off the Check Engine Light.