P1345 – Kia DTC

Kia DTC P1345 – No SGC Signal (1.6L)

DTC P1345 meaning on Kia

DTC P1345 on a Kia indicates a problem with the Camshaft Position Sensor (CMP) or the synchronization between the CMP and the Crankshaft Position Sensor (CKP).

Kia DTC P1345 symptoms

• Check Engine Light (CEL) illuminated
• Engine may run rough or stall
• Decreased fuel efficiency

Kia DTC P1345 causes

• Defective Camshaft Position Sensor (CMP)
• Incorrect installation of the CMP
• Timing belt issues
• Wiring or connector problems

Kia DTC P1345 seriousness

The seriousness of DTC P1345 on a Kia depends on the underlying cause. Ignoring this issue can lead to engine performance problems and potential stalling, which may result in safety hazards.

How to diagnose DTC P1345 on Kia

1. Use a scan tool to retrieve the trouble codes
2. Inspect the Camshaft Position Sensor and its wiring for damage
3. Check the timing belt for proper alignment
4. Test the synchronization between the CMP and CKP sensors

How to fix DTC P1345 on Kia

1. Replace the Camshaft Position Sensor if faulty
2. Ensure proper installation of the CMP
3. Address any timing belt issues
4. Repair or replace damaged wiring or connectors

How to erase DTC P1345 on Kia

1. After fixing the underlying issue, use a scan tool to clear the trouble codes
2. Ensure the repair has resolved the problem before clearing the codes