Land Rover DTC P0113 – Air Temperature Sensor High Out of Range Fault
DTC P0113 meaning on Land Rover
- DTC P0113 indicates that the Engine Control Module (ECM) has detected a high voltage signal from the Intake Air Temperature (IAT) sensor.
- The IAT sensor is responsible for measuring the temperature of the incoming air into the engine.
- When the ECM receives a high out-of-range signal from the IAT sensor, it triggers the P0113 diagnostic trouble code.
Land Rover DTC P0113 symptoms
- Check Engine Light (CEL) illuminated on the dashboard.
- Reduced engine performance or power.
- Potential fuel economy decrease.
Land Rover DTC P0113 causes
- Faulty or damaged IAT sensor.
- Wiring issues such as a short circuit or open circuit in the IAT sensor circuit.
- Connector problems in the IAT sensor circuit.
Land Rover DTC P0113 seriousness
- While the vehicle may still be operable with DTC P0113, it is important to address the issue promptly to prevent potential engine damage.
- Ignoring the high out-of-range signal from the IAT sensor can lead to incorrect air-fuel mixture calculations and affect engine performance.
How to diagnose DTC P0113 on Land Rover
- Use an OBD-II scanner to retrieve the specific DTC P0113 code.
- Inspect the IAT sensor and its wiring for any visible damage or corrosion.
- Test the IAT sensor using a multimeter to check for proper resistance values.
- Check the connector for any signs of corrosion or poor connection.
How to fix DTC P0113 on Land Rover
- Replace the faulty IAT sensor with a new one.
- Repair any damaged wiring in the IAT sensor circuit.
- Clean or replace the connector if necessary.
- Clear the DTC P0113 code from the ECM after completing the repairs.
How to erase DTC P0113 on Land Rover
- Use an OBD-II scanner to access the ECM and clear the DTC P0113 code.
- Follow the scanner’s instructions to erase the code from the system.
- After clearing the code, start the vehicle and ensure the Check Engine Light is no longer illuminated.