P0335 – Land Rover DTC

Land Rover DTC P0335 – Crankshaft Position Sensor Signal Error Fault

DTC P0335 meaning on Land Rover

1. DTC P0335 indicates a fault with the crankshaft position sensor signal on a Land Rover.
2. The Engine Control Module (ECM) uses this sensor to determine the position of the crankshaft for ignition timing and fuel injection.

Land Rover DTC P0335 symptoms

• Check Engine Light (CEL) illuminated on the dashboard.
• Engine may stall or have difficulty starting.
• Decreased fuel efficiency.
• Engine misfires or rough idling.

Land Rover DTC P0335 causes

• Defective crankshaft position sensor.
• Wiring issues such as shorts or open circuits in the sensor circuit.
• Connector problems or corrosion affecting sensor signal transmission.

Land Rover DTC P0335 seriousness

1. If left unresolved, DTC P0335 can lead to engine performance issues and potential engine damage.
2. It is important to address this fault promptly to prevent further complications.

How to diagnose DTC P0335 on Land Rover

1. Use a diagnostic scan tool to retrieve the fault code and check for any related codes.
2. Inspect the crankshaft position sensor and its wiring for any visible damage or corrosion.
3. Test the sensor’s resistance and voltage output to determine if it is functioning correctly.

How to fix DTC P0335 on Land Rover

1. Replace the faulty crankshaft position sensor with a new, OEM-quality sensor.
2. Repair any damaged wiring or connectors in the sensor circuit.
3. Clear the fault code and perform a test drive to ensure the issue is resolved.

How to erase DTC P0335 on Land Rover

1. Use a diagnostic scan tool to clear the fault code from the ECM memory.
2. Ensure the repair has been completed successfully before clearing the code.
3. Perform a final check to confirm the Check Engine Light is no longer illuminated.