B1216 – OBD-II DTC

OBD-II DTC B1216 – Emergency & Road Side Assistance Switch Circuit Short to Ground

DTC B1216 meaning

DTC B1216 refers to a diagnostic trouble code indicating a short to ground in the Emergency & Road Side Assistance Switch Circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. The Emergency & Road Side Assistance Switch is typically used to activate emergency services or roadside assistance features in the vehicle.

DTC B1216 symptoms

Common symptoms associated with DTC B1216 may include:

• Inoperative Emergency & Road Side Assistance Switch
• Warning lights illuminated on the dashboard
• Failure of the vehicle’s emergency features to activate
• Possible issues with other electrical components in the vehicle

DTC B1216 causes

The causes of DTC B1216 can vary, but typical reasons include:

• Short circuit in the wiring harness
• Faulty Emergency & Road Side Assistance Switch
• Corrosion or damage in the electrical connectors
• Issues with the vehicle’s body control module (BCM)

DTC B1216 seriousness

DTC B1216 is considered a moderate issue. While it may not affect the vehicle’s drivability, it can disable important safety features. If the Emergency & Road Side Assistance Switch is not functioning, it may hinder the driver’s ability to access emergency services when needed, making it a concern that should be addressed promptly.

How to diagnose DTC B1216

To diagnose DTC B1216, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the wiring and connectors associated with the Emergency & Road Side Assistance Switch for any visible damage or corrosion.
3. Check for continuity in the wiring to ensure there are no breaks or shorts.
4. Test the Emergency & Road Side Assistance Switch for proper operation using a multimeter.
5. Examine the body control module (BCM) for any faults or issues.

How to fix DTC B1216 step-by-step instructions

To fix DTC B1216, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors related to the Emergency & Road Side Assistance Switch.
3. Replace the Emergency & Road Side Assistance Switch if it is found to be faulty.
4. Reconnect the wiring and ensure all connections are secure and free of corrosion.
5. Reconnect the vehicle’s battery and clear the DTC using an OBD-II scanner.
6. Test the Emergency & Road Side Assistance Switch to ensure it operates correctly.

How to erase DTC B1216

To erase DTC B1216, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.