B1450 – OBD-II DTC

OBD-II DTC B1450 – Wiper Wash/Delay Switch Circuit Failure

DTC B1450 meaning

DTC B1450 refers to a diagnostic trouble code indicating a failure in the Wiper Wash/Delay Switch Circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. The wiper wash/delay switch is responsible for controlling the operation of the windshield wipers and the washer fluid system. When the system detects an issue with this circuit, it triggers the B1450 code, signaling that the switch may not be functioning correctly or that there is a problem in the circuit itself.

DTC B1450 symptoms

Common symptoms associated with DTC B1450 may include:

• Windshield wipers not functioning or operating erratically
• Washer fluid not spraying when activated
• Inconsistent delay settings for wiper operation
• Dashboard warning lights illuminated
• Possible electrical issues in related systems

DTC B1450 causes

Several factors can lead to the triggering of DTC B1450, including:

• Faulty wiper wash/delay switch
• Wiring issues, such as shorts or open circuits
• Corroded or damaged connectors
• Faulty body control module (BCM) or other control modules
• Electrical interference or grounding issues

DTC B1450 seriousness

The seriousness of DTC B1450 can vary depending on the symptoms and the impact on vehicle safety. While it may not pose an immediate danger, non-functioning wipers can significantly impair visibility during adverse weather conditions, increasing the risk of accidents. Therefore, it is advisable to address this issue promptly to ensure safe driving conditions.

How to diagnose DTC B1450

To diagnose DTC B1450, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1450 code.
2. Inspect the wiper wash/delay switch for physical damage or wear.
3. Check the wiring and connectors for signs of corrosion, shorts, or breaks.
4. Test the switch operation using a multimeter to ensure it is functioning correctly.
5. Examine the body control module for any faults or error codes.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC B1450 step-by-step instructions

To fix DTC B1450, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and replace the wiper wash/delay switch if it is found to be faulty.
3. Repair or replace any damaged wiring or connectors in the circuit.
4. Ensure all connections are secure and free from corrosion.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the wiper and washer functions to confirm proper operation.

How to erase DTC B1450

To erase DTC B1450, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.