B1452 – OBD-II DTC

OBD-II DTC B1452 – Wiper Wash/Delay Switch Circuit Short To Battery

DTC B1452 meaning

DTC B1452 refers to a diagnostic trouble code indicating a short circuit in the wiper wash/delay switch circuit to battery. This code is generated when the vehicle’s onboard diagnostic system detects an abnormal voltage level in the wiper wash system, suggesting that the circuit is receiving power directly from the battery instead of through the intended control mechanisms.

DTC B1452 symptoms

Common symptoms associated with DTC B1452 may include:

• Wipers not functioning properly
• Wiper wash system not activating
• Intermittent wiper operation
• Dashboard warning lights illuminated
• Increased battery drain

DTC B1452 causes

Several factors can lead to the occurrence of DTC B1452, including:

• Faulty wiper wash/delay switch
• Damaged wiring or connectors in the wiper circuit
• Short circuit in the wiper motor or associated components
• Corrosion or poor connections in the electrical system
• Malfunctioning body control module (BCM)

DTC B1452 seriousness

DTC B1452 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s drivability, it can lead to reduced visibility during inclement weather due to malfunctioning wipers. Additionally, a short circuit can pose a risk of electrical fires or further damage to the vehicle’s electrical system if not addressed promptly.

How to diagnose DTC B1452

To diagnose DTC B1452, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the wiper wash/delay switch for physical damage or wear.
3. Check the wiring and connectors for signs of corrosion or damage.
4. Test the voltage at the wiper motor and switch using a multimeter.
5. Examine the body control module for faults or software issues.
6. Clear the DTC and perform a functional test of the wiper system.

How to fix DTC B1452 step-by-step instructions

To fix DTC B1452, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and replace the wiper wash/delay switch if it is found to be faulty.
3. Repair or replace any damaged wiring or connectors in the wiper circuit.
4. Test the wiper motor for proper operation and replace it if necessary.
5. Clean any corroded connections and ensure all electrical contacts are secure.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Test the wiper system to ensure it operates correctly.

How to erase DTC B1452

To erase DTC B1452, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and perform a test drive to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.