B1465 – OBD-II DTC

OBD-II DTC B1465 – Wiper Brake/Run Relay Circuit Open

DTC B1465 meaning

DTC B1465 refers to a diagnostic trouble code indicating an open circuit in the Wiper Brake/Run Relay circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. The Wiper Brake/Run Relay is responsible for controlling the operation of the windshield wipers and ensuring they function correctly during various driving conditions.

DTC B1465 symptoms

When DTC B1465 is triggered, the following symptoms may be observed:

• Windshield wipers may not operate at all.
• Wipers may operate intermittently or erratically.
• Inability to use wiper functions such as wash or delay.
• Dashboard warning lights may illuminate.

DTC B1465 causes

Several factors can lead to the occurrence of DTC B1465, including:

• Faulty Wiper Brake/Run Relay.
• Open or damaged wiring in the relay circuit.
• Corroded or loose electrical connections.
• Issues with the wiper control switch.
• Faulty Body Control Module (BCM) or other related control modules.

DTC B1465 seriousness

DTC B1465 is considered a moderate issue. While it may not affect the vehicle’s ability to operate, it can significantly impair visibility during rain or adverse weather conditions due to non-functioning wipers. This can lead to unsafe driving situations, making it essential to address the issue promptly.

How to diagnose DTC B1465

To diagnose DTC B1465, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1465.
2. Inspect the Wiper Brake/Run Relay for any visible damage or corrosion.
3. Check the wiring and connectors associated with the relay for continuity and signs of wear.
4. Test the Wiper Control Switch for proper operation.
5. Examine the Body Control Module (BCM) for any faults or issues.
6. Perform a continuity test on the relay circuit to identify any open circuits.

How to fix DTC B1465 step-by-step instructions

To fix DTC B1465, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and replace the Wiper Brake/Run Relay if it is found to be faulty.
3. Repair or replace any damaged wiring or connectors in the relay circuit.
4. Clean any corroded connections to ensure proper electrical contact.
5. Test the Wiper Control Switch and replace it if it is malfunctioning.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Test the wipers to ensure they operate correctly after repairs.

How to erase DTC B1465

To erase DTC B1465, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.