B1472 – OBD-II DTC

OBD-II DTC B1472 – Lamp Headlamp Input Circuit Short To Ground

DTC B1472 meaning

DTC B1472 refers to a diagnostic trouble code indicating a short circuit to ground in the headlamp input circuit. This code is generated when the vehicle’s onboard diagnostic system detects an abnormal condition in the headlamp circuit, specifically when the voltage level is lower than expected due to a direct connection to ground.

DTC B1472 symptoms

Common symptoms associated with DTC B1472 may include:

• Headlamps not functioning or flickering
• Dashboard warning lights illuminated
• Inconsistent headlamp brightness
• Other electrical components may also be affected

DTC B1472 causes

Several factors can lead to the triggering of DTC B1472, including:

• Damaged wiring or connectors in the headlamp circuit
• Corrosion or poor connections at the headlamp or related components
• Faulty headlamp switch or relay
• Short circuits caused by aftermarket modifications or repairs

DTC B1472 seriousness

The seriousness of DTC B1472 can vary, but it is generally considered a moderate issue. While it may not immediately affect the drivability of the vehicle, it can compromise visibility at night or in poor weather conditions, increasing the risk of accidents. Prompt diagnosis and repair are recommended to ensure safe operation.

How to diagnose DTC B1472

To diagnose DTC B1472, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the headlamp wiring and connectors for visible damage or corrosion.
3. Check the headlamp switch and relay for proper operation.
4. Test the voltage and ground at the headlamp connector using a multimeter.
5. Look for any aftermarket modifications that may have caused a short circuit.

How to fix DTC B1472 step-by-step instructions

To fix DTC B1472, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the headlamp circuit.
3. Clean any corroded connections to ensure good electrical contact.
4. Replace any faulty headlamp switches or relays as needed.
5. Reconnect the battery and test the headlamps to ensure proper operation.
6. Use the OBD-II scanner to clear the DTC and verify that it does not return.

How to erase DTC B1472

To erase DTC B1472, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.