B1483 – OBD-II DTC

OBD-II DTC B1483 – Brake Pedal Input Circuit Failure

DTC B1483 meaning

DTC B1483 refers to a fault in the brake pedal input circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the signal from the brake pedal position sensor. The brake pedal input is crucial for various systems, including the anti-lock braking system (ABS) and electronic stability control (ESC).

DTC B1483 symptoms

Common symptoms associated with DTC B1483 may include:

• Illumination of the check engine light or brake warning light
• Inconsistent or unresponsive brake pedal behavior
• Activation of the ABS or traction control warning lights
• Potential issues with cruise control functionality

DTC B1483 causes

Several factors can lead to the occurrence of DTC B1483, including:

• Faulty brake pedal position sensor
• Wiring issues, such as shorts or open circuits in the brake pedal input circuit
• Corrosion or poor connections at the sensor or connector
• Faulty engine control module (ECM) or body control module (BCM)

DTC B1483 seriousness

The seriousness of DTC B1483 can vary depending on the vehicle’s specific systems affected. It is generally considered a moderate issue because it can impact braking performance and safety features. Ignoring this code may lead to compromised braking efficiency or failure of safety systems, which can increase the risk of accidents.

How to diagnose DTC B1483

To diagnose DTC B1483, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1483.
2. Inspect the brake pedal position sensor and its wiring for visible damage or disconnections.
3. Check the voltage and ground at the brake pedal position sensor using a multimeter.
4. Test the brake pedal position sensor for proper operation by comparing its output to manufacturer specifications.
5. Examine the ECM or BCM for any related fault codes that may provide additional context.

How to fix DTC B1483 step-by-step instructions

To fix DTC B1483, follow these steps:

1. Repair or replace any damaged wiring or connectors in the brake pedal input circuit.
2. If the brake pedal position sensor is faulty, replace it with a new one.
3. Clear any corrosion from connectors and ensure all connections are secure.
4. Recheck the voltage and ground at the brake pedal position sensor to ensure proper operation.
5. Reconnect the battery and perform a test drive to verify that the DTC does not return.

How to erase DTC B1483

To erase DTC B1483, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu and select the option to clear or erase codes.
3. Confirm the action and wait for the scanner to complete the process.
4. Disconnect the scanner and perform a test drive to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.