B1495 – OBD-II DTC

OBD-II DTC B1495 – Decklid Punch-Out Sensor Circuit Failure

DTC B1495 meaning

DTC B1495 refers to a fault in the Decklid Punch-Out Sensor Circuit. This sensor is responsible for detecting the position of the decklid (trunk) and ensuring that it is properly closed. When the onboard diagnostic system detects an issue with this circuit, it triggers the B1495 code, indicating a malfunction that may affect the vehicle’s security and functionality.

DTC B1495 symptoms

Common symptoms associated with DTC B1495 may include:

• Trunk not registering as closed
• Trunk light remaining on
• Inability to activate the trunk release
• Security system issues
• Warning lights on the dashboard

DTC B1495 causes

Several factors can lead to the B1495 code being triggered, including:

• Faulty decklid punch-out sensor
• Wiring issues, such as shorts or open circuits
• Corrosion or damage to connectors
• Faulty body control module (BCM)
• Improper installation or alignment of the decklid

DTC B1495 seriousness

The seriousness of DTC B1495 can vary. While it may not immediately affect the drivability of the vehicle, it can lead to issues with the trunk’s functionality and security features. Ignoring this code may result in further electrical problems or potential security vulnerabilities.

How to diagnose DTC B1495

To diagnose DTC B1495, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1495 code.
2. Inspect the decklid punch-out sensor for physical damage or misalignment.
3. Check the wiring and connectors for signs of wear, corrosion, or damage.
4. Test the sensor’s resistance and voltage output using a multimeter.
5. Examine the body control module for any faults or error codes.
6. Clear the code and perform a road test to see if the code returns.

How to fix DTC B1495 step-by-step instructions

To fix DTC B1495, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the decklid punch-out sensor.
2. If the sensor is faulty, replace it with a new one.
3. Ensure that the decklid is properly aligned and closes securely.
4. Reconnect any disconnected wiring and ensure all connections are secure.
5. Clear the DTC using an OBD-II scanner.
6. Test the system to confirm that the issue has been resolved.

How to erase DTC B1495

To erase DTC B1495, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the diagnostic menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.