B1510 – OBD-II DTC

OBD-II DTC B1510 – Flash To Pass Switch Circuit Short To Ground

DTC B1510 meaning

DTC B1510 refers to a diagnostic trouble code indicating a fault in the Flash To Pass switch circuit, specifically a short to ground condition. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for malfunctions. The Flash To Pass switch is typically used to activate the vehicle’s high beam headlights temporarily.

DTC B1510 symptoms

Common symptoms associated with DTC B1510 may include:

• High beam headlights not functioning properly
• Inability to activate the Flash To Pass feature
• Dashboard warning lights illuminated
• Possible issues with other lighting functions

DTC B1510 causes

Several factors can lead to the occurrence of DTC B1510, including:

• A short circuit in the Flash To Pass switch wiring
• Faulty Flash To Pass switch
• Corroded or damaged connectors in the circuit
• Issues with the vehicle’s body control module (BCM)

DTC B1510 seriousness

The seriousness of DTC B1510 can vary. While it may not pose an immediate safety risk, it can affect the functionality of the vehicle’s lighting system, which is crucial for safe driving, especially at night. It is advisable to address this code promptly to ensure proper vehicle operation and compliance with safety regulations.

How to diagnose DTC B1510

To diagnose DTC B1510, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1510 code.
2. Inspect the Flash To Pass switch for physical damage or wear.
3. Check the wiring and connectors for signs of corrosion or shorts.
4. Test the Flash To Pass switch using a multimeter to ensure it operates correctly.
5. Examine the body control module for any faults or issues.

How to fix DTC B1510 step-by-step instructions

To fix DTC B1510, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the Flash To Pass switch.
3. If the Flash To Pass switch is faulty, replace it with a new one.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Test the Flash To Pass function to ensure it operates correctly.

How to erase DTC B1510

To erase DTC B1510, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.