B1552 – OBD-II DTC

OBD-II DTC B1552 – Decklid Release Circuit Open

DTC B1552 meaning

DTC B1552 refers to a diagnostic trouble code indicating an open circuit in the decklid release circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. The decklid release circuit is responsible for the operation of the trunk release mechanism, allowing the driver or passengers to open the trunk remotely.

DTC B1552 symptoms

Common symptoms associated with DTC B1552 may include:

• Inability to open the trunk using the remote or interior switch.
• Trunk release light may not illuminate when attempting to activate the release.
• Possible related warning lights on the dashboard.
• Intermittent or complete failure of the trunk release function.

DTC B1552 causes

Several factors can lead to the occurrence of DTC B1552, including:

• Open or damaged wiring in the decklid release circuit.
• Faulty trunk release switch.
• Defective body control module (BCM) or other related control modules.
• Corrosion or poor connections in the circuit.
• Issues with the trunk latch mechanism.

DTC B1552 seriousness

The seriousness of DTC B1552 can vary based on the vehicle’s design and the importance of the trunk release function. While it may not affect the vehicle’s drivability, it can lead to inconvenience and accessibility issues. In some cases, it may indicate underlying electrical problems that could affect other systems.

How to diagnose DTC B1552

To diagnose DTC B1552, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1552 code.
2. Inspect the decklid release circuit wiring for any visible damage or disconnections.
3. Test the trunk release switch for proper operation using a multimeter.
4. Check for continuity in the circuit from the switch to the body control module.
5. Examine the body control module for any fault codes or issues.
6. Inspect the trunk latch mechanism for any mechanical failures.

How to fix DTC B1552 step-by-step instructions

To fix DTC B1552, follow these steps:

1. Repair or replace any damaged wiring in the decklid release circuit.
2. Replace the faulty trunk release switch if it is not functioning correctly.
3. Ensure all connections are clean and secure, addressing any corrosion.
4. If the body control module is faulty, consider reprogramming or replacing it.
5. Test the trunk latch mechanism and replace it if necessary.
6. Clear the DTC using an OBD-II scanner and test the system to ensure proper operation.

How to erase DTC B1552

To erase DTC B1552, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.