B1554 – OBD-II DTC

OBD-II DTC B1554 – Decklid Release Circuit Short To Ground

DTC B1554 meaning

DTC B1554 refers to a diagnostic trouble code indicating a short circuit to ground in the decklid release circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. The decklid release circuit is responsible for controlling the mechanism that opens the trunk or rear hatch of the vehicle. When the system detects an abnormal condition, such as a short to ground, it triggers this specific code.

DTC B1554 symptoms

Common symptoms associated with DTC B1554 may include:

• The trunk or rear hatch does not open when the release button is pressed.
• Intermittent or complete failure of the decklid release function.
• Dashboard warning lights may illuminate, indicating a fault in the system.
• Other electrical components in the vicinity may also exhibit issues due to the short circuit.

DTC B1554 causes

Several factors can lead to the occurrence of DTC B1554, including:

• A damaged or frayed wiring harness in the decklid release circuit.
• Corrosion or poor connections at the connectors associated with the decklid release.
• Faulty decklid release switch or actuator.
• Moisture intrusion into the electrical components, leading to short circuits.
• Aftermarket modifications that may interfere with the original wiring.

DTC B1554 seriousness

DTC B1554 is considered a moderate to serious issue, primarily because it affects the functionality of the trunk or rear hatch release. While it may not prevent the vehicle from operating, it can lead to inconvenience and potential security concerns if the trunk cannot be accessed. Additionally, unresolved electrical issues can lead to further complications in the vehicle’s electrical system.

How to diagnose DTC B1554

To diagnose DTC B1554, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1554 code.
2. Inspect the wiring and connectors associated with the decklid release circuit for any visible damage or corrosion.
3. Check the decklid release switch for proper operation using a multimeter.
4. Test the decklid release actuator to ensure it is functioning correctly.
5. Look for any signs of moisture or foreign substances in the electrical components.
6. Perform a continuity test on the wiring to check for shorts to ground.

How to fix DTC B1554 step-by-step instructions

To fix DTC B1554, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the decklid release circuit.
3. Clean any corroded connections and ensure all connectors are securely attached.
4. Replace the decklid release switch if it is found to be faulty.
5. Test the decklid release actuator and replace it if necessary.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Test the decklid release function to ensure it operates correctly.

How to erase DTC B1554

To erase DTC B1554, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.