B1558 – OBD-II DTC

OBD-II DTC B1558 – Ignition Run/Start Circuit Short To Ground

DTC B1558 meaning

DTC B1558 refers to a diagnostic trouble code indicating a short to ground in the ignition run/start circuit. This code is typically associated with issues in the vehicle’s electrical system, particularly affecting the ignition system’s ability to function properly. The ignition run/start circuit is crucial for the operation of various components, including the engine control module (ECM) and other related systems.

DTC B1558 symptoms

Common symptoms associated with DTC B1558 may include:

• Engine not starting or cranking
• Intermittent electrical issues
• Dashboard warning lights illuminated
• Loss of power to accessories
• Inconsistent operation of the ignition system

DTC B1558 causes

Several factors can lead to the occurrence of DTC B1558, including:

• Damaged wiring or connectors in the ignition circuit
• Faulty ignition switch
• Short circuits due to moisture or corrosion
• Malfunctioning relays or fuses
• Issues with the engine control module (ECM)

DTC B1558 seriousness

DTC B1558 is considered a serious issue as it can prevent the vehicle from starting or operating correctly. If left unaddressed, it may lead to further electrical problems or damage to the ignition system. It is advisable to diagnose and repair this code promptly to ensure the vehicle’s reliability and safety.

How to diagnose DTC B1558

To diagnose DTC B1558, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the ignition run/start circuit wiring and connectors for damage or corrosion.
3. Check the ignition switch for proper operation.
4. Test the relays and fuses associated with the ignition system.
5. Perform a continuity test on the circuit to identify any shorts to ground.
6. Examine the ECM for any faults or issues.

How to fix DTC B1558 step-by-step instructions

To fix DTC B1558, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety.
2. Inspect and repair any damaged wiring or connectors in the ignition circuit.
3. Replace the ignition switch if it is found to be faulty.
4. Replace any blown fuses or malfunctioning relays.
5. Perform a continuity test again to ensure the circuit is clear of shorts.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC B1558

To erase DTC B1558, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.