B1568 – OBD-II DTC

OBD-II DTC B1568 – Lamp Headlamp High-Beam Circuit Open

DTC B1568 meaning

DTC B1568 refers to a diagnostic trouble code indicating an open circuit in the high-beam headlamp circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. When the vehicle’s computer detects that the high-beam circuit is not functioning correctly, it triggers this code to alert the technician of a potential issue.

DTC B1568 symptoms

Common symptoms associated with DTC B1568 may include:

• High-beam headlights not functioning
• Dashboard warning lights illuminated
• Inconsistent headlamp operation
• Possible flickering of high-beam lights

DTC B1568 causes

Several factors can lead to the triggering of DTC B1568, including:

• Faulty high-beam headlamp bulb
• Damaged wiring or connectors in the high-beam circuit
• Defective headlamp relay
• Issues with the body control module (BCM)
• Corrosion or poor connections in the circuit

DTC B1568 seriousness

The seriousness of DTC B1568 can vary. While it may not immediately affect the vehicle’s drivability, it can compromise visibility during nighttime driving or in low-light conditions. Addressing this issue promptly is important for safety and compliance with vehicle regulations.

How to diagnose DTC B1568

To diagnose DTC B1568, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the high-beam headlamp bulbs for any signs of damage or failure.
3. Check the wiring and connectors for any visible damage or corrosion.
4. Test the headlamp relay for proper operation.
5. Examine the body control module for any faults or issues.

How to fix DTC B1568 step-by-step instructions

To fix DTC B1568, follow these step-by-step instructions:

1. Replace any faulty high-beam headlamp bulbs.
2. Repair or replace damaged wiring or connectors in the high-beam circuit.
3. Replace the headlamp relay if it is found to be defective.
4. Address any issues with the body control module, which may involve reprogramming or replacement.
5. Clear the DTC using an OBD-II scanner and test the high-beam operation.

How to erase DTC B1568

To erase DTC B1568, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.