B1570 – OBD-II DTC

OBD-II DTC B1570 – Lamp Headlamp High-Beam Circuit Short To Ground

DTC B1570 meaning

DTC B1570 refers to a diagnostic trouble code indicating a short circuit in the high-beam headlamp circuit. This code is generated when the vehicle’s onboard diagnostic system detects an electrical fault that causes the high-beam circuit to be grounded improperly. The high-beam headlamps are essential for providing additional visibility during nighttime driving or in low-light conditions, and any issues in this circuit can affect their functionality.

DTC B1570 symptoms

Common symptoms associated with DTC B1570 may include:

• High-beam headlamps not functioning
• Dashboard warning lights illuminated
• Low-beam headlamps may also be affected
• Possible flickering or intermittent operation of the headlamps

DTC B1570 causes

Several factors can lead to the occurrence of DTC B1570, including:

• Damaged wiring or connectors in the high-beam circuit
• Faulty headlamp relay
• Short circuit due to moisture or corrosion
• Defective high-beam headlamp bulb
• Issues with the body control module (BCM) or other related control modules

DTC B1570 seriousness

The seriousness of DTC B1570 can vary, but it is generally considered a moderate issue. While the vehicle may still be operable, the failure of high-beam headlamps can significantly reduce visibility during nighttime driving, increasing the risk of accidents. It is advisable to address this issue promptly to ensure safe driving conditions.

How to diagnose DTC B1570

To diagnose DTC B1570, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1570.
2. Inspect the high-beam headlamp circuit wiring and connectors for any visible damage or corrosion.
3. Check the headlamp relay for proper operation.
4. Test the high-beam headlamp bulbs to ensure they are functioning correctly.
5. Use a multimeter to check for continuity and shorts in the circuit.
6. Examine the body control module for any faults or issues.

How to fix DTC B1570 step-by-step instructions

To fix DTC B1570, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the high-beam circuit.
3. Replace any faulty headlamp bulbs or relays as needed.
4. Clean any corrosion from connectors and ensure all connections are secure.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the high-beam headlamps to ensure they are functioning properly.

How to erase DTC B1570

To erase DTC B1570, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.