B1588 – OBD-II DTC

OBD-II DTC B1588 – Autolamp Delay Increase Circuit Open

DTC B1588 meaning

DTC B1588 refers to a diagnostic trouble code indicating an issue with the Autolamp Delay Increase Circuit. This code is triggered when the vehicle’s onboard diagnostic system detects an open circuit in the circuit responsible for controlling the delay feature of the autolamps. The autolamps are designed to automatically turn on and off based on ambient light conditions, and any malfunction in this circuit can affect their operation.

DTC B1588 symptoms

Common symptoms associated with DTC B1588 may include:

• Autolamps not functioning as intended
• Inconsistent lighting behavior (e.g., lights staying on longer than usual or not turning on at all)
• Dashboard warning lights illuminated
• Possible issues with other lighting features

DTC B1588 causes

The causes of DTC B1588 can vary, but typical reasons include:

• Open circuit in the autolamp delay increase circuit
• Faulty wiring or connectors
• Defective autolamp control module
• Corrosion or damage in the electrical system

DTC B1588 seriousness

DTC B1588 is considered a moderate issue. While it may not prevent the vehicle from operating, it can lead to safety concerns due to improper lighting. If the autolamps do not function correctly, it may result in reduced visibility during nighttime driving or in low-light conditions, increasing the risk of accidents.

How to diagnose DTC B1588

To diagnose DTC B1588, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the wiring and connectors associated with the autolamp delay increase circuit for any visible damage or corrosion.
3. Check for continuity in the circuit using a multimeter.
4. Test the autolamp control module for proper operation.
5. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC B1588 step-by-step instructions

To fix DTC B1588, follow these steps:

1. Identify and repair any damaged wiring or connectors in the autolamp delay increase circuit.
2. Replace any faulty components, such as the autolamp control module, if necessary.
3. Ensure all connections are secure and free from corrosion.
4. Recheck the circuit for continuity after repairs.
5. Clear the DTC using an OBD-II scanner.
6. Test the autolamps to ensure they function correctly.

How to erase DTC B1588

To erase DTC B1588, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the DTC menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.