B1589 – OBD-II DTC

OBD-II DTC B1589 – Autolamp Delay Increase Circuit Short To Battery

DTC B1589 meaning

DTC B1589 refers to a diagnostic trouble code indicating a fault in the autolamp delay increase circuit. This code specifically points to a short circuit to battery voltage within the circuit responsible for controlling the delay feature of the vehicle’s automatic lighting system. When this code is triggered, it suggests that the system is receiving an unexpected voltage level, which can affect the operation of the autolamps.

DTC B1589 symptoms

Common symptoms associated with DTC B1589 may include:

• Autolamps not functioning as intended
• Inconsistent lighting behavior (e.g., lights turning on/off unexpectedly)
• Dashboard warning lights illuminated
• Possible issues with other electrical components in the vehicle

DTC B1589 causes

The causes of DTC B1589 can vary, but typical reasons include:

• Wiring issues, such as frayed or damaged wires
• Faulty connectors or poor connections in the circuit
• Short circuits due to moisture or corrosion
• Defective autolamp control module
• Malfunctioning sensors related to the lighting system

DTC B1589 seriousness

DTC B1589 is considered a moderate to serious issue. While it may not immediately affect the drivability of the vehicle, it can lead to safety concerns due to improper lighting. Additionally, if left unaddressed, it may cause further electrical problems or damage to the vehicle’s lighting system.

How to diagnose DTC B1589

To diagnose DTC B1589, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1589 code.
2. Inspect the wiring and connectors associated with the autolamp delay circuit for any visible damage.
3. Check for any additional DTCs that may provide more context to the issue.
4. Test the voltage at the autolamp control module to ensure it is within the specified range.
5. Perform continuity tests on the wiring to identify any shorts or breaks.
6. Examine the autolamp control module for proper operation.

How to fix DTC B1589 step-by-step instructions

To fix DTC B1589, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors found during diagnosis.
3. If a short circuit is identified, isolate the affected section of the circuit and repair it.
4. Replace the autolamp control module if it is determined to be faulty.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the autolamp system to ensure proper functionality.

How to erase DTC B1589

To erase DTC B1589, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.