B1618 – OBD-II DTC

OBD-II DTC B1618 – Wiper Rear Disable Switch Circuit Short To Ground

DTC B1618 meaning

DTC B1618 refers to a diagnostic trouble code indicating a problem with the rear wiper disable switch circuit. Specifically, it signifies that there is a short to ground in the circuit, which can prevent the rear wiper from functioning correctly. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components for faults.

DTC B1618 symptoms

Common symptoms associated with DTC B1618 may include:

• Rear wiper not functioning
• Intermittent operation of the rear wiper
• Inability to disable the rear wiper
• Dashboard warning lights related to the wiper system

DTC B1618 causes

Several factors can lead to the occurrence of DTC B1618, including:

• Faulty rear wiper disable switch
• Damaged wiring or connectors in the wiper circuit
• Corrosion or poor connections in the electrical system
• Short circuits caused by exposed wires
• Issues with the vehicle’s body control module (BCM)

DTC B1618 seriousness

The seriousness of DTC B1618 can vary depending on the vehicle’s use and the specific symptoms present. While it may not pose an immediate safety risk, a malfunctioning rear wiper can reduce visibility in adverse weather conditions, potentially leading to dangerous driving situations. It is advisable to address this issue promptly to ensure safe vehicle operation.

How to diagnose DTC B1618

To diagnose DTC B1618, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the rear wiper disable switch for any visible damage or wear.
3. Check the wiring and connectors for signs of corrosion or shorts.
4. Test the continuity of the circuit using a multimeter.
5. Examine the body control module for any faults or error codes.

How to fix DTC B1618 step-by-step instructions

To fix DTC B1618, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety.
2. Inspect and replace the rear wiper disable switch if faulty.
3. Repair or replace any damaged wiring or connectors in the circuit.
4. Clean any corroded connections to ensure proper electrical flow.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the rear wiper operation to confirm the issue is resolved.

How to erase DTC B1618

To erase DTC B1618, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.