B1662 – OBD-II DTC

OBD-II DTC B1662 – Seat Driver Front Up Circuit Short To Ground

DTC B1662 meaning

DTC B1662 refers to a diagnostic trouble code indicating a fault in the seat driver front up circuit, specifically a short to ground condition. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for malfunctions. A short to ground means that the electrical circuit is unintentionally connected to the ground, causing an abnormal voltage reading.

DTC B1662 symptoms

Common symptoms associated with DTC B1662 may include:

• Inoperable seat adjustment functions for the driver’s seat.
• Warning lights illuminated on the dashboard, particularly related to the seat or airbag systems.
• Unusual noises from the seat adjustment mechanism.
• Intermittent or erratic seat movement.

DTC B1662 causes

Several factors can lead to the occurrence of DTC B1662, including:

• Damaged wiring or connectors in the seat adjustment circuit.
• Faulty seat position sensor.
• Corrosion or dirt in electrical connections.
• Malfunctioning seat control module.
• Improper installation of aftermarket seat components.

DTC B1662 seriousness

The seriousness of DTC B1662 can vary. While it may not affect the vehicle’s drivability, it can impact the safety and comfort of the driver. If the seat cannot be adjusted properly, it may lead to an unsafe driving position. Additionally, if the issue is related to the airbag system, it could compromise passenger safety in the event of a collision.

How to diagnose DTC B1662

To diagnose DTC B1662, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1662 code.
2. Inspect the wiring and connectors related to the driver front seat adjustment circuit for any visible damage.
3. Check for continuity in the circuit to ensure there are no breaks or shorts.
4. Test the seat position sensor for proper operation.
5. Examine the seat control module for any faults or error codes.

How to fix DTC B1662 step-by-step instructions

To fix DTC B1662, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors found during diagnosis.
3. Replace the seat position sensor if it is found to be faulty.
4. Clean any corrosion or dirt from electrical connections to ensure good contact.
5. Reinstall any components that were removed and reconnect the battery.
6. Clear the DTC using an OBD-II scanner and test the seat adjustment functions.

How to erase DTC B1662

To erase DTC B1662, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.