B1715 – OBD-II DTC

OBD-II DTC B1715 – Seat Driver Front Down Switch Circuit Short To Battery

DTC B1715 meaning

DTC B1715 refers to a diagnostic trouble code indicating a fault in the seat driver front down switch circuit. Specifically, it signifies that there is a short circuit to battery voltage in the down switch circuit of the driver’s seat. This can prevent the seat from adjusting properly, affecting the driver’s comfort and safety.

DTC B1715 symptoms

Common symptoms associated with DTC B1715 may include:

• Driver’s seat not moving down
• Inability to adjust the driver’s seat position
• Illuminated warning lights on the dashboard
• Possible malfunction of other seat-related functions

DTC B1715 causes

Several factors can lead to the occurrence of DTC B1715, including:

• Faulty seat driver front down switch
• Wiring issues, such as frayed or damaged wires
• Corrosion or poor connections in the circuit
• Short circuit in the seat adjustment motor
• Faulty seat control module

DTC B1715 seriousness

DTC B1715 is considered a moderate issue. While it may not pose an immediate safety risk, it can affect the driver’s ability to adjust the seat, which is crucial for safe driving. Ignoring this code may lead to further electrical issues or damage to the seat adjustment system.

How to diagnose DTC B1715

To diagnose DTC B1715, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1715.
2. Inspect the seat driver front down switch for physical damage or wear.
3. Check the wiring and connectors for signs of corrosion or damage.
4. Test the continuity of the down switch circuit using a multimeter.
5. Examine the seat control module for faults or error codes.
6. Perform a functional test of the seat adjustment system.

How to fix DTC B1715 step-by-step instructions

To fix DTC B1715, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety.
2. Inspect and replace the seat driver front down switch if faulty.
3. Repair or replace any damaged wiring or connectors in the circuit.
4. Clean any corrosion found on connectors and ensure secure connections.
5. Test the seat adjustment motor for proper operation and replace if necessary.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Perform a test drive to ensure the issue is resolved and the seat functions correctly.

How to erase DTC B1715

To erase DTC B1715, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and check if the DTC reappears after a test drive.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.