B1728 – OBD-II DTC

OBD-II DTC B1728 – Seat Driver Rear Up Switch Circuit Short To Ground

DTC B1728 meaning

DTC B1728 refers to a diagnostic trouble code indicating a short circuit to ground in the seat driver rear up switch circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. The specific issue arises when the vehicle’s control module detects an abnormal voltage level in the circuit associated with the rear seat driver’s up switch, suggesting that the circuit is unintentionally connected to ground.

DTC B1728 symptoms

Common symptoms associated with DTC B1728 may include:

• Inoperable rear seat adjustment controls
• Warning lights illuminated on the dashboard
• Erratic behavior of the seat adjustment system
• Possible related codes stored in the OBD-II system

DTC B1728 causes

Several factors can lead to the occurrence of DTC B1728, including:

• Wiring issues such as frayed or damaged wires
• Faulty seat switch or connector
• Corrosion or poor connections in the circuit
• Short circuits caused by moisture or foreign objects
• Malfunctioning control module

DTC B1728 seriousness

DTC B1728 is considered a moderate issue. While it may not affect the vehicle’s overall drivability, it can lead to safety concerns if the seat adjustment is not functioning properly. Additionally, unresolved electrical issues can lead to further complications in the vehicle’s electrical system.

How to diagnose DTC B1728

To diagnose DTC B1728, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the wiring and connectors associated with the seat driver rear up switch for any visible damage or corrosion.
3. Test the seat switch for proper operation using a multimeter.
4. Check for any additional DTCs that may provide more context to the issue.
5. Perform a continuity test on the circuit to identify any shorts to ground.

How to fix DTC B1728 step-by-step instructions

To fix DTC B1728, follow these steps:

1. Repair or replace any damaged wiring or connectors found during the inspection.
2. If the seat switch is faulty, replace it with a new one.
3. Ensure all connections are clean and secure to prevent corrosion.
4. Test the circuit again to confirm that the short to ground has been resolved.
5. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the issue does not return.

How to erase DTC B1728

To erase DTC B1728, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.