B1753 – OBD-II DTC

OBD-II DTC B1753 – Hazard Flash Output Circuit Failure

DTC B1753 meaning

DTC B1753 refers to a fault in the Hazard Flash Output Circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the circuit responsible for the hazard lights. The hazard lights are crucial for signaling to other drivers that the vehicle is experiencing a problem or is stationary in a potentially dangerous situation.

DTC B1753 symptoms

Common symptoms associated with DTC B1753 may include:

• Hazard lights not functioning
• Inconsistent operation of the turn signals
• Dashboard warning lights illuminated
• Possible issues with other electrical components

DTC B1753 causes

The causes of DTC B1753 can vary, but typical reasons include:

• Faulty hazard switch
• Damaged wiring or connectors in the hazard light circuit
• Short circuit or open circuit in the output circuit
• Malfunctioning body control module (BCM)

DTC B1753 seriousness

DTC B1753 is considered a moderate to serious issue. While it may not immediately affect the drivability of the vehicle, the inability to use hazard lights can pose safety risks. It is essential to address this code promptly to ensure that the vehicle can signal effectively in emergencies.

How to diagnose DTC B1753

To diagnose DTC B1753, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the hazard switch for any visible damage or wear.
3. Check the wiring and connectors in the hazard light circuit for continuity and signs of damage.
4. Test the body control module for proper operation.
5. Perform a visual inspection of the circuit for shorts or opens.

How to fix DTC B1753 step-by-step instructions

To fix DTC B1753, follow these steps:

1. Replace the faulty hazard switch if it is damaged.
2. Repair or replace any damaged wiring or connectors in the circuit.
3. Test and replace the body control module if it is malfunctioning.
4. Ensure all connections are secure and free of corrosion.
5. Clear the DTC using an OBD-II scanner and test the system to ensure the issue is resolved.

How to erase DTC B1753

To erase DTC B1753, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the diagnostic trouble codes menu on the scanner.
4. Select the option to clear or erase codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.