B1754 – OBD-II DTC

OBD-II DTC B1754 – Hazard Flash Output Circuit Open

DTC B1754 meaning

DTC B1754 refers to a diagnostic trouble code indicating an issue with the Hazard Flash Output Circuit. Specifically, it signifies that there is an open circuit in the wiring or components associated with the hazard flashers. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle functions to ensure proper operation and safety.

DTC B1754 symptoms

Common symptoms associated with DTC B1754 may include:

• Inoperative hazard lights
• Dashboard warning lights illuminated
• Intermittent or non-functioning turn signals
• Potential issues with other electrical components

DTC B1754 causes

The causes of DTC B1754 can vary, but typical reasons include:

• Faulty wiring or connectors in the hazard flash output circuit
• Defective hazard switch
• Malfunctioning body control module (BCM)
• Corrosion or damage in the electrical system

DTC B1754 seriousness

DTC B1754 is considered a moderate issue. While it may not immediately affect the drivability of the vehicle, it can compromise safety by rendering hazard lights inoperative. This can be particularly dangerous in emergency situations where visibility to other drivers is crucial.

How to diagnose DTC B1754

To diagnose DTC B1754, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the wiring and connectors related to the hazard flash output circuit for damage or corrosion.
3. Test the hazard switch for proper operation.
4. Check the body control module for faults or malfunctions.
5. Perform continuity tests on the circuit to identify any breaks or opens.

How to fix DTC B1754 step-by-step instructions

To fix DTC B1754, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the hazard flash output circuit.
3. Replace the hazard switch if it is found to be defective.
4. Test the body control module and replace it if necessary.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the hazard lights and turn signals to ensure proper operation.

How to erase DTC B1754

To erase DTC B1754, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.