B1837 – OBD-II DTC

OBD-II DTC B1837 – Door Unlock Disarm Output Circuit Short To Ground

DTC B1837 meaning

DTC B1837 refers to a diagnostic trouble code indicating a problem with the door unlock disarm output circuit. Specifically, it signifies that there is a short to ground in the circuit responsible for unlocking the vehicle’s doors. This issue can prevent the doors from unlocking properly or may cause other related functions to malfunction.

DTC B1837 symptoms

Common symptoms associated with DTC B1837 may include:

• Doors not unlocking when the remote or key fob is used.
• Inconsistent door locking and unlocking behavior.
• Illumination of the warning light on the dashboard.
• Failure of the central locking system to operate.

DTC B1837 causes

Several factors can lead to the occurrence of DTC B1837, including:

• Wiring issues, such as frayed or damaged wires in the door unlock circuit.
• Faulty door lock actuator or related components.
• Corrosion or poor connections in the electrical connectors.
• Malfunctioning body control module (BCM) that controls the locking system.

DTC B1837 seriousness

The seriousness of DTC B1837 can vary based on the symptoms experienced. While it may not pose an immediate safety risk, it can lead to inconvenience and security issues. If the doors do not unlock, it may prevent access to the vehicle, which can be problematic in emergencies. Therefore, it is advisable to address this issue promptly.

How to diagnose DTC B1837

To diagnose DTC B1837, follow these steps:

• Use an OBD-II scanner to confirm the presence of the code.
• Inspect the wiring and connectors related to the door unlock circuit for any visible damage.
• Check the door lock actuator for proper operation.
• Test the body control module for faults or malfunctions.
• Perform continuity tests on the circuit to identify any shorts to ground.

How to fix DTC B1837 step-by-step instructions

To fix DTC B1837, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect the wiring harness for any signs of damage, such as fraying or corrosion.
3. If damaged wires are found, repair or replace them as necessary.
4. Check the door lock actuator for proper functionality and replace it if faulty.
5. Examine the electrical connectors for corrosion and clean or replace them if needed.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Test the door locking system to ensure proper operation.

How to erase DTC B1837

To erase DTC B1837, follow these steps:

• Connect an OBD-II scanner to the vehicle’s diagnostic port.
• Turn on the ignition without starting the engine.
• Navigate to the trouble codes section on the scanner.
• Select the option to clear or erase the codes.
• Confirm the action and wait for the scanner to complete the process.
• Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.