B1875 – OBD-II DTC

OBD-II DTC B1875 – Turn Signal / Hazard Switch Signal Circuit Failure

DTC B1875 meaning

DTC B1875 refers to a diagnostic trouble code indicating a failure in the Turn Signal / Hazard Switch Signal Circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. The B1875 code specifically points to an issue with the signal being sent from the turn signal or hazard switch to the vehicle’s control module.

DTC B1875 symptoms

Common symptoms associated with DTC B1875 may include:

• Malfunctioning turn signals
• Inoperative hazard lights
• Dashboard warning lights illuminated
• Intermittent or erratic signal operation
• Failure of other related electrical components

DTC B1875 causes

Several factors can lead to the triggering of DTC B1875, including:

• Faulty turn signal or hazard switch
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connectors
• Faulty body control module (BCM)
• Software glitches in the vehicle’s control systems

DTC B1875 seriousness

The seriousness of DTC B1875 can vary. While it may not immediately affect the vehicle’s drivability, it can lead to safety concerns due to malfunctioning turn signals and hazard lights. This can increase the risk of accidents, especially in low visibility conditions. Therefore, it is important to address this issue promptly.

How to diagnose DTC B1875

To diagnose DTC B1875, follow these steps:

• Use an OBD-II scanner to confirm the presence of the B1875 code.
• Inspect the turn signal and hazard switch for physical damage or wear.
• Check the wiring and connectors for signs of corrosion or loose connections.
• Test the continuity of the signal circuit using a multimeter.
• Examine the body control module for any faults or software issues.

How to fix DTC B1875 step-by-step instructions

To fix DTC B1875, follow these step-by-step instructions:

1. Start by using an OBD-II scanner to clear the DTC and see if it returns.
2. Inspect the turn signal and hazard switch for any visible damage.
3. Check all related wiring and connectors for corrosion or loose connections.
4. If necessary, repair or replace damaged wiring or connectors.
5. Test the turn signal and hazard switch functionality.
6. If the issue persists, consider replacing the turn signal or hazard switch.
7. Finally, if all else fails, test or replace the body control module.

How to erase DTC B1875

To erase DTC B1875, follow these steps:

• Connect an OBD-II scanner to the vehicle’s diagnostic port.
• Turn on the vehicle’s ignition without starting the engine.
• Access the scanner’s menu and select the option to clear or erase trouble codes.
• Confirm the action and wait for the scanner to complete the process.
• Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.