B1895 – OBD-II DTC

OBD-II DTC B1895 – Driver’s / Passenger’s Door Ajar Output Circuit Failure

DTC B1895 meaning

DTC B1895 refers to a fault in the driver’s or passenger’s door ajar output circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the signal that indicates whether the door is open or closed. The system relies on this information to manage various functions, such as interior lighting and alarm systems.

DTC B1895 symptoms

Common symptoms associated with DTC B1895 may include:

• Interior lights remaining on when the vehicle is off
• Door ajar warning light illuminated on the dashboard
• Inconsistent operation of power door locks
• Alarm system malfunctioning or triggering unexpectedly

DTC B1895 causes

Several factors can lead to the occurrence of DTC B1895, including:

• Faulty door ajar switch
• Wiring issues, such as frayed or shorted wires
• Corrosion in the door connector or terminals
• Faulty body control module (BCM)
• Improperly aligned door or latch mechanism

DTC B1895 seriousness

The seriousness of DTC B1895 can vary. While it may not pose an immediate safety risk, it can lead to inconvenience and potential battery drain due to lights remaining on. Additionally, it may affect the functionality of other systems, such as the alarm or locking mechanisms, which could compromise vehicle security.

How to diagnose DTC B1895

To diagnose DTC B1895, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the door ajar switch for proper operation.
3. Check the wiring and connectors for damage or corrosion.
4. Test the continuity of the door ajar circuit.
5. Examine the body control module for faults.

How to fix DTC B1895 step-by-step instructions

To fix DTC B1895, consider the following steps:

1. Replace the faulty door ajar switch if it is not functioning correctly.
2. Repair or replace any damaged wiring or connectors.
3. Clean any corrosion found in the connectors and ensure a secure connection.
4. Realign the door and latch mechanism if misalignment is detected.
5. If all else fails, consider replacing the body control module.

How to erase DTC B1895

To erase DTC B1895 from the vehicle’s memory, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase codes.
4. Turn off the ignition and disconnect the scanner.
5. Start the vehicle and check if the code reappears after a test drive.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.