B1903 – OBD-II DTC

OBD-II DTC B1903 – Air Bag Crash Sensor #1 Ground Circuit Short To Battery

DTC B1903 meaning

DTC B1903 refers to a diagnostic trouble code indicating a problem with the airbag system, specifically related to the crash sensor #1 ground circuit. This code suggests that there is a short circuit in the ground circuit of the airbag crash sensor, which can prevent the airbag system from functioning correctly in the event of a collision.

DTC B1903 symptoms

Common symptoms associated with DTC B1903 may include:

• Illumination of the airbag warning light on the dashboard
• Potential malfunction of the airbag system
• Increased risk of airbag deployment failure during a crash
• Diagnostic scanner may show the B1903 code along with other related codes

DTC B1903 causes

Several factors can lead to the occurrence of DTC B1903, including:

• Damaged wiring or connectors in the airbag system
• Corrosion or poor connections in the ground circuit
• Faulty crash sensor #1
• Issues with the airbag control module
• Accidental disconnection or damage during repairs or maintenance

DTC B1903 seriousness

DTC B1903 is considered serious because it directly affects the airbag system’s functionality. If the airbag system is compromised, it may not deploy in the event of a collision, increasing the risk of injury to the occupants. Therefore, it is crucial to address this code promptly to ensure passenger safety.

How to diagnose DTC B1903

To diagnose DTC B1903, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1903 code.
2. Inspect the wiring and connectors related to crash sensor #1 for any visible damage or corrosion.
3. Check the ground circuit for continuity and proper voltage.
4. Test the crash sensor #1 using a multimeter to ensure it is functioning correctly.
5. Examine the airbag control module for any faults or issues.

How to fix DTC B1903 step-by-step instructions

To fix DTC B1903, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors associated with crash sensor #1.
3. Clean any corrosion found on connectors and ensure all connections are secure.
4. If the crash sensor #1 is faulty, replace it with a new one.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a test drive to ensure the airbag system is functioning correctly and the warning light does not reappear.

How to erase DTC B1903

To erase DTC B1903, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and turn off the ignition.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.