B1908 – OBD-II DTC

OBD-II DTC B1908 – Air Bag Crash Sensor #2 Ground Circuit Short To Battery

DTC B1908 meaning

DTC B1908 refers to a diagnostic trouble code indicating a problem with the airbag system, specifically related to Crash Sensor #2. This code signifies that there is a short circuit in the ground circuit of the sensor, which is causing it to be improperly grounded. The airbag system relies on various sensors to detect collisions and deploy airbags accordingly, and a fault in this circuit can prevent the system from functioning correctly.

DTC B1908 symptoms

Common symptoms associated with DTC B1908 may include:

• Illumination of the airbag warning light on the dashboard
• Potential failure of the airbag system to deploy in the event of a collision
• Increased diagnostic trouble codes related to the airbag system
• Possible issues with other safety features that rely on the airbag system

DTC B1908 causes

Several factors can lead to the occurrence of DTC B1908, including:

• Damaged wiring or connectors in the airbag system
• Corrosion or poor connections at the ground point of Crash Sensor #2
• Faulty Crash Sensor #2 itself
• Issues with the airbag control module
• Accidental disconnection or damage during repairs or maintenance

DTC B1908 seriousness

DTC B1908 is considered a serious issue because it directly affects the functionality of the airbag system. If the airbag system is not operational, it poses a significant risk to the safety of the vehicle occupants in the event of a collision. Therefore, it is crucial to address this code promptly to ensure that the airbag system is functioning correctly.

How to diagnose DTC B1908

To diagnose DTC B1908, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1908.
2. Inspect the wiring and connectors associated with Crash Sensor #2 for any visible damage or corrosion.
3. Check the ground connection for the sensor to ensure it is secure and free of corrosion.
4. Test the resistance of the sensor and the ground circuit using a multimeter.
5. Examine the airbag control module for any additional fault codes that may provide further insight.
6. Perform a continuity test to ensure there are no breaks in the wiring.

How to fix DTC B1908 step-by-step instructions

To fix DTC B1908, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors related to Crash Sensor #2.
3. Clean any corrosion found on the ground connection and ensure it is securely fastened.
4. If the sensor is faulty, replace Crash Sensor #2 with a new one.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a test drive to ensure the airbag system is functioning correctly and the warning light does not reappear.

How to erase DTC B1908

To erase DTC B1908, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.