B1912 – OBD-II DTC

OBD-II DTC B1912 – Air Bag Diagnostic Monitor Ground Circuit Short To Ground

DTC B1912 meaning

DTC B1912 refers to a diagnostic trouble code indicating a short to ground in the airbag diagnostic monitor ground circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems, including the airbag system. A short to ground means that the circuit is unintentionally connected to the ground, which can prevent the airbag system from functioning correctly.

DTC B1912 symptoms

Common symptoms associated with DTC B1912 may include:

• Illuminated airbag warning light on the dashboard
• Airbag system malfunction
• Inability to deploy airbags in the event of a collision
• Possible diagnostic trouble codes related to the airbag system

DTC B1912 causes

Several factors can lead to the occurrence of DTC B1912, including:

• Damaged wiring or connectors in the airbag system
• Corrosion or poor connections in the ground circuit
• Faulty airbag control module
• Accidental grounding of the airbag circuit

DTC B1912 seriousness

DTC B1912 is considered serious because it indicates a potential failure in the airbag system. If the airbag system is not functioning correctly, it may not deploy in the event of a collision, increasing the risk of injury to occupants. Therefore, it is crucial to address this issue promptly.

How to diagnose DTC B1912

To diagnose DTC B1912, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1912.
2. Inspect the airbag system wiring and connectors for damage or corrosion.
3. Check the ground circuit for continuity and proper connections.
4. Test the airbag control module for faults or failures.
5. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC B1912 step-by-step instructions

To fix DTC B1912, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect the wiring and connectors in the airbag system for any visible damage.
3. Repair or replace any damaged wiring or connectors as necessary.
4. Check the ground circuit for continuity and ensure it is securely connected.
5. Test the airbag control module and replace it if it is found to be faulty.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Perform a road test to verify that the issue has been resolved and the DTC does not reappear.

How to erase DTC B1912

To erase DTC B1912, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and check if the airbag warning light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.