B1914 – OBD-II DTC

OBD-II DTC B1914 – Air Bag Crash Sensors #1 / #2 Circuit Short To Ground

DTC B1914 meaning

DTC B1914 refers to a diagnostic trouble code indicating a short circuit to ground in the airbag crash sensors #1 or #2 circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems, including safety features like airbags. When the system detects an issue with the crash sensor circuits, it triggers the airbag warning light and stores the code for further diagnosis.

DTC B1914 symptoms

Common symptoms associated with DTC B1914 may include:

• Illumination of the airbag warning light on the dashboard
• Possible malfunction of the airbag system
• Inconsistent airbag deployment during a crash
• Diagnostic scanner may show DTC B1914 along with other related codes

DTC B1914 causes

Several factors can lead to the triggering of DTC B1914, including:

• Wiring issues such as frayed or damaged wires in the crash sensor circuit
• Corrosion or poor connections at the sensor or connector terminals
• Faulty airbag crash sensors #1 or #2
• Improper installation or replacement of airbag components
• Electrical shorts caused by aftermarket modifications or repairs

DTC B1914 seriousness

DTC B1914 is considered a serious issue because it directly affects the vehicle’s airbag system. If the airbag system is compromised, it may not deploy in the event of a collision, increasing the risk of injury to occupants. Therefore, it is crucial to address this code promptly to ensure the safety of the vehicle’s occupants.

How to diagnose DTC B1914

To diagnose DTC B1914, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1914.
2. Inspect the wiring and connectors associated with the airbag crash sensors for any visible damage or corrosion.
3. Check for any additional DTCs that may provide more context to the issue.
4. Test the resistance of the crash sensors to ensure they are within manufacturer specifications.
5. Perform a continuity test on the wiring to check for shorts to ground.
6. If necessary, consult the vehicle’s service manual for specific diagnostic procedures related to the airbag system.

How to fix DTC B1914 step-by-step instructions

To fix DTC B1914, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors found during the diagnosis.
3. If the crash sensors are faulty, replace them with new, manufacturer-approved parts.
4. Reconnect all connectors and ensure they are secure and free of corrosion.
5. Reconnect the vehicle’s battery.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify that the airbag warning light does not reappear.

How to erase DTC B1914

To erase DTC B1914, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and check if the airbag warning light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.